> For the complete documentation index, see [llms.txt](https://developer.harness.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.harness.io/release-notes/runtime-protection-agent/waap-release-notes/2026/agent-release-notes/ebpfrn26.md).

# eBPF

## 1.34.0 - 18<sup>th</sup> November

### Resolved Issues

#### Invalid process exclusion filters are now rejected at startup

An invalid `exclude_processes` regular expression previously caused the agent to crash. The agent now validates the filter at configuration parse time and rejects an invalid value with a clear configuration error instead of crashing.

#### perfmap queue size is now validated

The `perfmap_queue_size` setting previously accepted values that could cause the agent to crash, including `0` or very large numbers. The agent now rejects `0` and caps the maximum at 1,000,000, preventing crashes caused by misconfiguration.

#### gRPC responses using identity content-encoding are no longer dropped

Resolved a regression where gRPC responses sent with `identity` content-encoding were silently dropped during capture. The agent now treats `identity` as a pass-through encoding, so these responses are captured correctly.

***

## 1.33.1 - 31<sup>st</sup> October

### Resolved Issues

#### Security and dependency updates

This release addresses known vulnerabilities by updating several bundled dependencies, including curl and the Go runtime, and by removing a compromised certificate authority from the agent's trusted certificate store.

***

## 1.33.0 - 16<sup>th</sup> October

### Updates

#### Updated bundled OpenTelemetry Go library

Updated the bundled OpenTelemetry Go library to v1.46.0.

#### Server-Sent Events (SSE) capture is now enabled by default

SSE traffic capture, introduced in a previous release, is now enabled by default. No configuration change is required to start capturing SSE event data.

### Resolved Issues

#### Fixed vulnerabilities in the bundled curl

Resolved CVE-2026-1824 and CVE-2026-19931 by replacing the distro-installed curl with a statically-linked curl 8.22.0 build.

#### Upgraded crypto dependency to address known vulnerabilities

Upgraded the bundled crypto dependency to v1.56.0 to address known vulnerabilities.

#### Invalid proc\_fs\_scan\_period\_in\_sec value no longer crashes the tracer

Setting `proc_fs_scan_period_in_sec` to `0` previously caused the tracer to panic and span export to fail. The agent now rejects a value of `0` at configuration parse time, preventing the crash.

#### Agent actions now poll correctly after package installs

Installing the eBPF tracer via the apt or rpm package could leave `TA_DATA_DIR` unset, which caused agent-action polling to fail with a missing service instance ID. Traffic capture itself was unaffected, but remote agent actions did not work. Package installs now set `TA_DATA_DIR` correctly, matching the other install methods (Helm, Docker, ECS, and the tarball installer).

***

## 1.32.0 - 16<sup>th</sup> September

### Updates

#### Capture server certificate metadata as span attributes

The agent can now optionally capture server certificate metadata for inspected connections and expose it as span attributes, allowing you to build policies based on the certificates presented on those connections. The capture is opt-in.

#### Profiling data capture in debug actions

Debug actions can now collect runtime profiling (`pprof`) data, providing richer diagnostics when troubleshooting agent behavior.

#### Refreshed bundled components and dependencies

Updated bundled third-party components, including the `gRPC` library, to current releases.

### Resolved Issues

#### Debug information now uploads to the correct destination

Resolved an issue where the fetch-debug-information action uploaded its diagnostics bundle to the local host instead of the configured platform endpoint, so collected debug data now reaches its intended destination.

***

## 1.31.1 - 3<sup>rd</sup> September

### Resolved Issues

#### **Security fixes**

Addressed known security vulnerabilities by updating affected components and dependencies. Upgrading to this release is recommended to keep deployments current with the latest security fixes.

***

## 1.31.0 - 14<sup>th</sup> August

### Updates

#### Added Brotli and Zstandard compression support

The eBPF agent now supports traffic encoded with Brotli (`br`) and Zstandard (`zstd`) content encoding. This enables the agent to correctly decode and process traffic that uses these compression formats.

#### Updated native Go packages

Updated native Go packages to address known vulnerabilities and improve the overall security posture of the eBPF agent.

#### Updated github.com/klauspost/compress

Updated github.com/klauspost/compress to version 1.19.1 to address a known vulnerability.

#### Updated github.com/gopacket/gopacket

Updated github.com/gopacket/gopacket from version v1.3.1 to a patched version to resolve known vulnerabilities.

### Vulnerability fixes

| Vulnerability                      | Severity | Affected Package    |
| ---------------------------------- | -------- | ------------------- |
| CVE-2026-11850                     | Medium   | `libgssapi-krb5-2`  |
| CVE-2026-40355                     | High     | `libgssapi-krb5-2`  |
| CVE-2026-40356                     | High     | `libgssapi-krb5-2`  |
| CVE-2026-4046                      | High     | `libc-bin`          |
| CVE-2026-46600 Alias: GO-2026-5942 | High     | `golang.org/x/net`  |
| CVE-2026-5435                      | High     | `libc-bin`          |
| CVE-2026-54411                     | Medium   | `libpam-modules`    |
| CVE-2026-5450                      | Critical | `libc-bin`          |
| CVE-2026-56852 Alias: GO-2026-5970 | High     | `golang.org/x/text` |

### Resolved issues

#### Fixed the Fetch Debug Information agent action

The Fetch Debug Information agent action was incorrectly uploading the debug zip to [localhost](http://localhost) rather than to the actual TPA. This was caused by the wrapper's init config not being overridden correctly, defaulting to [localhost](http://localhost). This issue has been resolved. The agent now correctly uploads debug information to the configured TPA endpoint.

***

## 1.30.0 - 21<sup>st</sup> July

### Updates

#### Configurable DNS policy in Helm

You can now set the Kubernetes DNS policy for the eBPF agent through a Helm value, giving you control over how the agent's pods resolve DNS in your cluster.

### Resolved Issues

#### Security updates for bundled system packages

This release resolves multiple high- and medium-severity vulnerabilities (CVEs) in third-party system packages included in the agent image, including curl, ncurses, perl, gzip, and nghttp2, by updating them to their patched versions.

***

## 1.29.2 - 11<sup>th</sup> June

### Resolved Issues

#### Resolved process filter for Kubernetes not taking effect

Resolved an issue where the `include_processes` filter was not taking effect for Kubernetes deployments. Process filtering now applies correctly in Kubernetes environments, ensuring traffic capture is restricted to the configured processes as expected.

***

## 1.29.1 - 8<sup>th</sup> June

### Updates

#### Added configuration to force use of shared probe

A new configuration option is available to force the eBPF agent to use a shared probe, addressing scenarios in which DaemonSet pods may take an extended time to terminate during Helm upgrades.

This option is useful in deployments where probe-sharing reduces pod lifecycle delays, particularly when `capture_all_namespaces` is enabled.

#### Process filtering using include\_processes is now supported in Kubernetes

The `include_processes` filter, previously available only for non-Kubernetes deployments, now also works for Kubernetes deployments. This allows you to restrict traffic capture to specific processes in Kubernetes environments, consistent with the behavior already available in VM and bare-metal deployments.

### Resolved Issues

#### Resolved static attach failure when installing via tarball

Resolved an issue where static attach would fail when the eBPF agent was installed using the tarball-based install script.

The install script was not correctly substituting the `/etc` path for all configuration entries, leaving one path unrewritten. The script has been corrected, and static attachment now works as expected for tarball installations.

#### Resolved UTF-8 errors caused by unknown decompression

Resolved an issue where unknown or unsupported decompression formats in captured traffic could result in UTF-8 encoding errors. The agent now gracefully handles unrecognized decompression types, preventing malformed data from causing downstream parsing failures.

***

## 1.29.0 - 22<sup>nd</sup> May

### Updates

#### Updated container entrypoint script

The eBPF agent container entrypoint script has been updated to improve startup behavior and compatibility across supported deployment environments.

### Resolved Issues

#### Resolved memory leak in Kubernetes watchers, causing high CPU usage

Resolved a memory leak in the Kubernetes watcher components that caused unbounded memory growth over time. As memory accumulated, the Go runtime spent increasing CPU time on garbage collection, resulting in high CPU usage even on nodes with minimal traffic.

The leak has been fixed, reducing both memory consumption and CPU overhead for Kubernetes deployments.

#### Resolved eBPF environment being overridden by agent actions configuration

Resolved an issue where certain configuration fields, such as the environment name, could be unintentionally overridden when agent actions applied a configuration update via `EBPF_CONFIG_OVERRIDE_BASE64`.

The eBPF agent now correctly excludes protected configuration fields from being overridden by agent actions, ensuring the originally configured environment and other installation-time settings are preserved.

***

## 1.28.6 - 25<sup>th</sup> April

### Updates

#### Detection configuration support added to the eBPF agent

The eBPF agent now includes an updated Go Agent that supports detection configuration. This enables the eBPF agent to apply detection rules configured in the platform, ensuring consistent security evaluation across eBPF-based deployments alongside other agent types.

#### Host network support added to Helm charts

The eBPF agent Helm charts now support host network mode. This allows the agent to be deployed with`hostNetwork: true`, enabling traffic capture in environments where pods must share the host network namespace.

***

## 1.28.2 - 8<sup>th</sup> April

### Resolved Issues

#### Resolved libtraceable metrics exporter connection errors

Resolved an issue where the `libtraceable` metrics exporter would fail with connection refused errors after metrics were enabled by default in 1.28.0. The metrics configuration wiring has been corrected, ensuring that the OTLP gRPC metrics exporter connects successfully and exports metrics as expected.

#### Improved handling of gaps in TLS stream

Resolved an issue where gaps in a TLS stream could cause incorrect behavior during traffic capture. The eBPF agent now handles TLS stream gaps more gracefully, improving the reliability of data collection for TLS-encrypted traffic.

***

## 1.28.1 - 21<sup>st</sup> March

### Resolved Issues

#### Resolved Helm deployment failure when updateStrategy is enabled

Resolved an issue where deploying the eBPF agent via Helm would fail with a YAML parse error when `deploymentStrategy.updateStrategy.enabled` was set to `true` in `values.yaml`.

The error occurred due to a YAML formatting issue in the DaemonSet template. The template has been corrected, and Helm deployments with `updateStrategy` enabled now complete successfully.

***

## 1.28.0 - 10<sup>th</sup> March

### Updates

#### Image ID added to spans for Kubernetes deployments

The eBPF agent now includes the container image ID as an attribute on spans for Kubernetes deployments. This provides additional context for identifying the exact image version running in a pod, which is useful for correlating security events and API activity with specific container images.

#### Server-Sent Events (SSE) traffic data collection support

The eBPF agent now supports collecting Server-Sent Events (SSE) traffic, capturing SSE event data within spans. This extends observability to APIs that use SSE for streaming responses, enabling analysis of SSE-based traffic alongside standard request-response traffic.

#### libtraceable metrics enabled by default

`libtraceable` metrics are now enabled by default in the eBPF agent, providing out-of-the-box visibility into agent performance without requiring additional configuration.

### Resolved Issues

#### Resolved incorrect mTLS flag population in TLS 1.2 connections

Resolved an issue where the mTLS flag was not being correctly populated for TLS 1.2 connections. The flag is now set accurately, ensuring that mutual TLS connections are correctly identified in span data.

***

## 1.27.3 - 8<sup>th</sup> February

### Updates

#### Downgrade Cilium eBPF Version for GKE Autopilot Compatibility

Downgraded the bundled Cilium eBPF version to resolve a compatibility issue introduced after the upgrade in **eBPF agent version 1.26**, which affected GKE Autopilot 1.34 and later.

***

## 1.27.2 - 8<sup>th</sup> February

### Updates

#### Add 6.12.+ BTF in eBPF Package and Images

Added support for Linux kernel 6.12 and later BTF files in the eBPF package and container images to improve compatibility with newer kernel versions.

***

## 1.27.1 - 16<sup>th</sup> January

## Updates

#### Add Compression for Span Export

Added support for compressing spans during export to reduce network bandwidth usage and improve export efficiency.

#### Switch Sampling Engine Order to Prioritize Protection Span Rules

Updated the sampling engine order so that protection span rules are evaluated with higher priority, ensuring more accurate enforcement of protection policies.

#### Set TA\_DATA\_DIR by Default Across Deployments

Set `TA_DATA_DIR` by default across all deployment methods, including `rpm`, `deb`, install script, Helm, Terraform, and ECS, to ensure consistent data directory configuration.

***

## 1.27.0 - 6<sup>th</sup> January

### Updates

#### Token-Based Auth Support for TPA Connection

Added support for reporting token-based authentication between the eBPF tracer and the platform. When tracer authentication is enabled in TPA, and a valid reporting token is configured in the eBPF settings, spans are successfully exported to the platform.

### Resolved Issues

#### Upgrade crypto and rardecode to Fix Vulnerabilities

Upgraded crypto and rardecode dependencies to address known security vulnerabilities.

#### ECS CloudFormation Template Fix

Resolved issues in the ECS CloudFormation template to improve deployment reliability.

{% @harness-feedback/feedback module="release-notes" pagePath="release-notes/waap-release-notes/2026/agent-release-notes/ebpf" %}
