Ctrlk
Sign UpGet a DemoContact Us
For the complete documentation index, see llms.txt. This page is also available as Markdown.

ECS container HTTP latency

Add latency to inbound HTTP traffic on a specific port inside a percentage of running ECS tasks (EC2 launch type) for a configurable duration so you can test how clients behave when the HTTP service r

ECS container HTTP latency is an AWS chaos fault that adds LATENCY milliseconds of latency to inbound HTTP traffic on TARGET_SERVICE_PORT inside a percentage of running ECS tasks (EC2 launch type) for a configurable duration. The fault interposes a transparent HTTP proxy on the container instance, scoped to the target container via ECS container metadata and dispatched via AWS Systems Manager Run Command. Unlike ecs-container-network-latency, this fault affects only HTTP traffic on the specified port; other traffic is untouched.

Use this fault to test how HTTP clients of an ECS service behave when the service responds slowly: whether client timeouts engage, whether circuit breakers protect downstream systems, and whether retry storms get amplified or absorbed.

RUN YOUR FIRST EXPERIMENT

If you have not configured the chaos infrastructure yet, go to Quickstart to install the chaos infrastructure and run an experiment end to end.

Use cases

Run this fault when you want to answer concrete questions like:

  • Client timeout tuning: When the service responds LATENCY ms slower, do client timeouts fire correctly without breaking upstream callers?

  • Retry storm risk: Do retries amplify the latency into an outage, or does an exponential backoff calm the system?

  • Synchronous call chains: For services with deep call graphs, does the added latency push end-to-end latency over SLO?

  • Customer experience: Does the user-facing application surface the increased latency clearly, or does it appear to hang?

  • Downstream isolation: Does the slow service affect dependents in unexpected ways (thread pools, connection pools, queues)?

Prerequisites

  • Kubernetes version: 1.21 or later for the chaos infrastructure cluster. Go to What's supported to confirm distribution support.

  • Target ECS service or cluster: CLUSTER_NAME exists in REGION and uses the EC2 launch type.

  • Container instances are SSM-managed.

  • ECS container metadata enabled.

  • AWS credentials available: Either an AWS credentials file uploaded as a File Secret in Harness Secret Manager (see Authentication below) or an IAM role for service accounts (IRSA) bound to the chaos infrastructure service account.

  • IAM permissions granted: The credentials or role include the permissions listed below.

Supported environments

Platform
Support status

Amazon ECS on EC2 launch type

Supported

Amazon ECS on Fargate launch type

Not supported

HTTP/1.1 and HTTP/2 traffic on TARGET_SERVICE_PORT

Supported

HTTPS terminated inside the container

Not supported (the proxy needs to read request and response payloads in cleartext)

Linux container instances

Supported

Windows container instances

Not supported

AWS regions

Supported in every commercial region; pass the region in REGION

Permissions required

The IAM principal that the chaos pod uses (the credentials mounted from the Harness Secret Manager file secret, the IRSA role on the chaos service account, or the role assumed via ASSUME_ROLE_ARN) needs the following AWS actions.

Go to common policy for all AWS faults to use a single superset IAM policy across every AWS fault.

Authentication

The fault supports three credential delivery models. Pick one based on how your chaos infrastructure is deployed.

Method
When to use it
How to configure

Harness Secret Manager file secret

Chaos infrastructure runs outside EKS, or you want explicit static credentials

Upload the AWS credentials file as a File Secret in Harness Secret Manager and reference its identifier via AWS_AUTHENTICATION_SECRET

IAM Roles for Service Accounts (IRSA)

Chaos infrastructure runs in EKS and uses an OIDC-bound service account

No tunable changes; the chaos pod inherits the role automatically. Go to AWS IAM integration to set it up

Assume role

The fault needs to act in a different account or with elevated permissions

Set ASSUME_ROLE_ARN to the role ARN; the chaos pod assumes the role on top of its base credentials

When using the Harness Secret Manager method, the contents of the File Secret should be the AWS credentials file in the standard ~/.aws/credentials format:

Upload this file as a File Secret in Harness Secret Manager (Project Setup → Secrets → New File Secret), and pass the secret identifier in AWS_AUTHENTICATION_SECRET when configuring the fault.

Go to AWS named profile for chaos to switch between profiles inside a single credentials file.

Fault tunables

Configure the following fault parameters when you add ECS container HTTP latency to an experiment in Chaos Studio. Defaults are shown for reference.

Required parameters

Tunable
Description
Default

CLUSTER_NAME

Name of the target ECS cluster.

(required)

REGION

AWS region that hosts the ECS cluster (for example us-east-1).

(required)

Targeting parameters

Tunable
Description
Default

SERVICE_NAME

Name of the target ECS service. When set, the fault selects TASK_REPLICA_AFFECTED_PERC of the service's running tasks.

""

TASK_REPLICA_ID

ID of a specific task replica to target (overrides SERVICE_NAME and percentage selection).

""

TASK_REPLICA_AFFECTED_PERC

Percentage of running tasks to affect when SERVICE_NAME is set.

100

Chaos parameters

Tunable
Description
Default

LATENCY

Latency to inject in milliseconds.

2000

TARGET_SERVICE_PORT

TCP port the affected container serves on.

80

PROXY_PORT

Port the chaos proxy listens on inside the container. Pick a port not used by the application.

20000

NETWORK_INTERFACE

Network interface inside the container on which to install the redirect rules. auto discovers the primary interface.

auto

TOTAL_CHAOS_DURATION

Duration of the fault in seconds.

60

INSTALL_DEPENDENCIES

Install the proxy and networking tooling on each container instance if missing.

true

SEQUENCE

Order in which multiple tasks are affected: parallel installs the proxy on all selected tasks at once; serial does so one at a time.

parallel

RAMP_TIME

Wait period in seconds before and after the fault. Go to ramp time to read how it is applied.

0

Authentication

Tunable
Description
Default

ASSUME_ROLE_ARN

ARN of an IAM role to assume on top of the base credentials. Leave empty to use the base credentials directly.

""

AWS_AUTHENTICATION_SECRET

Identifier of the File Secret in Harness Secret Manager that contains the AWS credentials file. Not required when using IRSA.

""

Tunables that apply to every fault are documented in common tunables for all faults. AWS-specific shared tunables are documented in common AWS fault tunables.

Fault execution in brief

Resolves the running tasks for SERVICE_NAME (or the explicit TASK_REPLICA_ID), picks TASK_REPLICA_AFFECTED_PERC of them, and dispatches a transparent HTTP proxy via AWS Systems Manager Run Command into the affected container. New HTTP requests on TARGET_SERVICE_PORT are redirected through the proxy on PROXY_PORT, delayed by LATENCY ms, and forwarded to the application. After TOTAL_CHAOS_DURATION seconds, the proxy is stopped and the redirect rules are removed.

Expected behavior during fault execution

  • New HTTP requests on TARGET_SERVICE_PORT to the affected containers see a response latency of approximately LATENCY ms (one-way).

  • TCP latency below the HTTP layer is unaffected.

  • Application latency dashboards show the increase on the affected service.

  • Client timeouts below LATENCY ms trigger; retries may follow.

WHEN THE FAULT ENDS

The chaos pod stops the proxy and removes the redirect rules on each host. New HTTP requests bypass the proxy and complete normally.

Signals to watch

Attach resilience probes to assert each layer:

  • HTTP latency: Use an HTTP probe and assert percentile latency rises by approximately LATENCY ms during the fault.

  • Timeout failures: Use a Prometheus probe on client-side timeout counters.

  • Retry counters: Use a Prometheus probe on client-side retry counters to detect retry storms.

Verify the fault execution effect

While the experiment is running, confirm HTTP latency rose and recovered:

  1. Probe the endpoint with curl.

    Response time should rise by approximately LATENCY ms during the chaos window.

  2. Inspect the redirect rules on the host (via SSM).

    You should see rules redirecting TARGET_SERVICE_PORT to PROXY_PORT during the chaos window.

  3. Inspect SSM command status.

Recovery and cleanup

  • End of duration: The chaos pod stops the proxy and removes the redirect rules on each host.

  • Abort the experiment: Stopping the experiment from Chaos Studio cancels the SSM command and removes the proxy.

  • Manual recovery: If the fault exits before cleanup, remove the redirect rules with iptables -t nat -D PREROUTING ... (via SSM) and kill the proxy process on the affected hosts.

  • Workload recovery: Requests in flight during the chaos window may already have timed out; client code is responsible for retry.

Limitations

  • EC2 launch type only.

  • Container metadata must be enabled.

  • SSM-managed hosts only.

  • Linux-only.

  • HTTPS terminated inside the container is not supported.

  • One port per experiment: The proxy intercepts only TARGET_SERVICE_PORT. To affect multiple ports, run multiple experiments.

  • Cross-region targeting: A single experiment targets one region (the value of REGION).

Troubleshooting

ECS container HTTP latency fails with AccessDeniedException in Harness Chaos Engineering

The credentials supplied to the chaos pod do not have the required ECS or SSM permissions. Confirm the IAM policy attached to the user, role, or IRSA service account includes ecs:DescribeServices, ecs:DescribeTasks, ssm:SendCommand, and ssm:GetCommandInvocation.

ECS container HTTP latency reports PROXY_PORT is in use

Pick a different PROXY_PORT that is not used by your application or any sidecar inside the container. The default 20000 works in most environments. Verify free ports inside the container by running 'ss -ltn' via SSM on the host.

Probe shows no extra latency during the chaos window

The most common causes are: the request bypasses the proxy because the client connected to a different port (set TARGET_SERVICE_PORT to the actual application port); the request uses HTTPS terminated inside the container (the proxy cannot intercept TLS); the proxy could not install the iptables redirect rule (check NETWORK_INTERFACE); or the load balancer routed traffic away from the affected tasks. Inspect the chaos pod logs for proxy startup errors.

Redirect rules remain after the chaos window

If the cleanup SSM command failed, the iptables PREROUTING redirect rules may persist on the container instance. Send an SSM AWS-RunShellScript command to the affected container instance that flushes the iptables NAT PREROUTING chain. Be cautious if the host has other iptables rules in PREROUTING. The exact command is recorded in the chaos pod logs.

Related faults

Last updated

Was this helpful?